...

DCS 1800MHz Single Band Selective RF Repeater



1. Picture:


DCS 1800MHz Single Band Selective RF Repeater

2. Specification:


ItemsDCS1800
Frequency RangeUplink (Customized)1710~1785 MHz
Downlink (Customized)1805~1880 MHz
Working BandwidthCustomized
Maximum Input Power(Non-Destructive)10dBm
Maximum Output Power(Customized)43dBm
Maximum Gain≥ 85dB
ALC&AGC20dB (minimun)
Gain Adjustment Range0~31dB@step of 1dB
Voltage Standing Wave Ratio≤1.5
Noise Figure≤ 5dB
In-Band Ripple≤ 3dB
Spurious EmissionWithin Working Band≤ -15dBm/30kHz
Out of 869~894 MHz9 kHz ~ 1 GHz: ≤ -36dBm/30kHz
1 GHz ~ 12.75 GHz: ≤ -36dBm/30kHz
Third-order Inter-Modulation≤ 45dBc / 30kHz (Measured under reted output power)
System Delay≤ 5μs
I/O Impedance50 Ω
RF ConnectorN-Type (Female) / Changeable / Bottom of casing
Temperature RangeOperation: -25℃ ~ + 55°C / Storage: -30℃ ~ + 60°C
Relative Humidity Range≤ 95% (Non Condensing)
Power Supply(Customized)DC-48V or AC110V/220V, 50/60Hz
Spurious Emission≤-30dBm
ApplicationIndoor or Outdoor(IP65)
Dimensions428mm×328mm×175mm
Weight≤15 kg
Control ConnectorUSB port for local / remote
NMS Monitoring Function(Optional)Real-time Alarm for Door Status, Temperature, Power Supply, VSWR, etc; Remote Control Such as Turn On/Off, Increasing/Decreasing Output Power etc; Real-time Status for Output/Input Power, UL/DL Gain, All Status of Repeater etc.