...

TETRA ICS BDA


TETRA Single Band ICS BDA


TETRA Single Band ICS BDA




The TETRA Band ICS BDA (Bi-Directional Amplifier) is designed to provide a more cost-effective solution than adding a new Base Transceiver Station (BTS) to improve signal coverage and communication quality in TETRA ICS BDA system.


Feature:

  • Aluminum-alloy casing with IP65 protection for high resistance to dust, water and corrosion.
  • Supporting TETRA/DMR/P25/iDEN system.
  • Highly selective digital channel selector can process 8 channels simultaneously.
  • Real Time Interference Signal Cancellation (Multi-path Fading, Feed-Back signal).
  • Adopting filter with highly selectivity and low insertion loss eliminates interference between uplink and downlink.
  • RJ45 port provides a link to a notebook for local supervision or IP Based NMS (Network Management System) that can remotely supervise BDA’s working status and download operational parameters to the BDA Via Ethernet or LAN.

Aplications:

To expand signal coverage or fill signal blind area where radio network signal is weak or unavailable.

  • Public Safety
  • Transportation
  • Utilities
  • Government
  • Military
  • PAMR
  • Commercial & Industry
  • Oil & Gas
ItemsTETRA ICS BDA
Frequency Range (Customized)Uplink380~385 MHz / 415~420 MHz / 806~821 MHz
Downlink390~395 MHz / 425~430 MHz / 851~866 MHz
Maximum Output Power (Customized)Uplink30dBm
Downlink30/.../43±2dBm
Maximum Gain85/.../95±3dB (Customized)
Gain Adjustment Range1~31 dB @ Step of 1 dB
Operating Maximum Gain≥Antenna Isolation + 10dB
No. of Channels8
Power Amplifier Oscillation ProtectionInterference Cancellation System
Cancellation Feedback Signals – Maximum Sizes of Window≥6μSec
Interference Cancellation Range≥25dB
VSWR≤1.5
Noise Figure≤6dB
In-Band Ripple≤3dB
Maximum Input Power (Non-Destructive)-10dBm
Spurious Emission≤-36dBm
Third-order Inter-Modulation≤-45dBc
System Delay≤8.0μSec
I/O Impedance50Ω
RF ConnectorN-Type (Female)
Operation Temperature Range-25°C ~ + 55°C
Relative Humidity Range≤95% (Non Condensing)
ApplicationIndoor or Outdoor(IP65)
Dimensions428mm×328mm×175mm
Weight15Kg
Power Supply (Customized)AC110V or AC220V, 50/60Hz
Local ControlWeb Browser GUI Local Via RJ-45 Interface or WiFi Hotspot
NMS Mode (Optional)Wirelss Modem (3G/4G), IP Connectivity
NMS Function(Optional)Real-time Alarm for Door Status, Temperature, Power Supply, VSWR, etc; Remote Control Such as Turn On/Off, Increasing/Decreasing Output Power etc; Real-time Status for Output/Input Power, UL/DL Gain, All Status of BDA etc.